The Proven Solution: Catalytic Filtration with DMI-65 DMI-65 is an Australian-engineered, silica-sand-based catalytic media infused with proprietary oxidation sites. Unlike manganese greensand, it does not need potassium permanganate regeneration, making operation safer and simpler aquacorp.com.au . A small dose of sodium hypochlorite (household chlorine) is enough to keep the surface active, giving up to 5–10 years of continuous performance with minimal attrition waterequip.com.au dmi65.com . Performance highlights Removes iron and manganese to < 0.001 mg/L, protecting downstream RO membranes and distribution lines dmi65.com . High linear velocities—up to 30 m³ m⁻² h⁻¹, roughly twice that of conventional media, so filters are smaller and capex drops waterequip.com.au . Wide pH window (5.8 – 8.6) with best results around neutral pH—ideal for most Indian bore- and surface-water chemistries waterequip.com.au . Certified to NSF/ANSI 61 and UK Regulation 31, making it potable-water safe dmi65.com . Technical Specifications at a Glance Appearance: Brown–black spherical grains Particle size: 20 – 40 mesh (0.3 – 0.6 mm effective) Bulk density: 91 lb ft⁻³ (≈ 1.46 t m⁻³) Specific gravity: 2.69 Uniformity coefficient (UC): 1.4 Service flow: 5 – 30 m³ m⁻² h⁻¹ Back-wash flow: 25 – 40 m³ m⁻² h⁻¹ (20 – 50 % bed expansion) Min. bed depth: 600 mm (24 in) Operating pH: 5.8 – 8.6 (optimal 7 – 7.5) Max. water temp.: 45 °C Expected life: 5-10 years with < 5 % annual attrition

Product Description: The LATIX 8040 RO Membrane is a premium-grade reverse osmosis element designed and USA Technology to deliver superior water purification performance for residential, commercial, and industrial applications. Engineered with advanced thin-film composite technology, LATIX membranes provide exceptional salt rejection, high flux rates, and excellent chemical resistance — ensuring reliable operation and long service life. Ideal for Brackish water treatment, and Industrial process water purification, the LATIX 8040 membrane offers consistent removal of dissolved solids, bacteria, viruses, and organic contaminants. Its robust construction withstands variable feed water qualities and operational stresses while maintaining low fouling potential. Manufactured under stringent quality controls, LATIX membranes deliver cost-effective purification solutions with minimal downtime, reduced maintenance, and optimal energy efficiency — making them a trusted choice for water treatment plants across India. Technical Specifications Parameter LATIX 8040 RO Membrane Membrane Type Thin-Film Composite (TFC) Element Size 8 inches × 40 inches (nominal) Membrane Area 37m² (approximate) Salt Rejection ≥ 99.5 % Operating Temperature 5°C to 45°C pH Range (continuous) 2 to 11 pH Range (cleaning) 1 to 12 Maximum Feed Water TDS Up to 3500 ppm (can vary by feed water quality) Chlorine Tolerance < 0.1 ppm (membrane sensitive) Features & Benefits High salt and contaminant rejection ensuring purified, safe water Robust chemical resistance suitable for diverse feed water conditions Low fouling tendency extending membrane life and reducing cleaning frequency Consistent permeate flow for stable plant output Compatible with standard 8040 housings for easy retrofitting and replacement Good quality with local technical support and supply chain benefits Energy efficient operation lowering overall system costs

Technical Specifications Parameter Specification Maximum Operating Pressure 300 psi (20.7 bar) Maximum Operating Temperature 120 °F (49 °C) Minimum Operating Temperature 35 °F (2 °C) pH Range (Continuous Operation) 2 – 11 pH Range (Cleaning / CIP) 1 – 13 Maximum Feed Flow (Per Vessel) 10 – 12 gpm (38 – 45 L/min) – recommended Maximum Feedwater Turbidity 1 NTU (with proper pre-filtration) Maximum Feedwater SDI (15 min) ≤ 5 (requires pre-filtration to SDI ≤ 5) Membrane Element Size 8″ × 40″ (standard) Housing Body Material Filament-wound FRP, UV- and corrosion-resistant Why Choose Our 300 PSI FRP Housing? High-Pressure Capability: Rated for 300 psi to accommodate high-recovery, high-flux RO systems. Corrosion-Free Design: FRP construction eliminates corrosion risks present in metal housings. Long Service Life: Robust filament-wound shell and chemically resistant liner provide a typical lifespan of 10+ years with proper maintenance. Lightweight & User-Friendly: It’s easy to install and service, reducing labor costs. Equip your RO/NF/UF system with a reliable, industry-standard 300 PSI FRP membrane housing that combines durability, performance, and ease of maintenance. Contact us today to place an order or request a custom quote!

DuPont™ FILMTEC™ BW30-4040 RO Membrane Upgrade your reverse osmosis system with the DuPont™ FILMTEC™ BW30-4040 (often referred to as “BW 8040-400”), a high-performance spiral-wound RO element designed for medium to large commercial and industrial applications. Engineered for exceptional salt rejection, durability, and consistent throughput, this membrane delivers reliable water quality even under challenging conditions. Technical Specifications Model: BW30-4040 (BW 8040-400) Membrane Type: Thin-film polyamide spiral-wound Rated Flow: 4,000 GPD (15,140 L/day) @ 225 psi, 77 °F, 1,000 ppm feed Minimum Salt Rejection: 99.5% @ 225 psi, 77 °F, 1,000 ppm feed Operating Temperature Range: 35 – 113 °F (2 – 45 °C) Maximum Operating Pressure: 600 psi (4.1 MPa) pH Range, Continuous Operation: 2 – 11 pH Range, Cleaning: 1 – 13 TDS Tolerance: Up to 5,000 ppm (higher TDS may require elevated feed pressure) Maximum Feed Flow: 15 gpm (56.8 L/min) Maximum Feed SDI: ≤ 5 (pre-filtered) Installation & Maintenance Tips Pre-Filtration: Use a 5 µm sediment filter upstream to protect against particulate fouling. Chlorine Removal: Install a carbon block filter ahead of the membrane to eliminate free chlorine and protect the polyamide layer. Optimal Feed Pressure ⚙️: Maintain feed pressure between 200–250 psi for best performance. Avoid pressure spikes. Regular Cleaning Cycle 🧹: Conduct a light cleaning (pH < 11) every 3–6 months, depending on feedwater quality. Employ appropriate low-fouling cleaning solutions. Performance Monitoring 📊: Track permeate flow and conductivity regularly. Replace the membrane if flow drops by 15% or rejection falls below 98%. Key Features High Salt Rejection 🚰 Removes up to 99.5% of dissolved solids (TDS), including heavy metals, lead, and nitrates—ensuring ultra-pure product water. Robust Flow Capacity 💧 Rated at approximately 4,000 gallons per day (GPD) under standard test conditions (77 °F, 225 psi, 1,000 ppm feed water), making it ideal for light-industrial, large office, or small plant installations. Heavy-Duty Construction 🛡 Polyamide thin-film composite design resists fouling and chlorine exposure (with proper upstream carbon pre-treatment), extending operational life. Wide pH Tolerance 🌡 Operates effectively across a pH range of 2–11 (continuous) and 1–13 during chemical cleaning, permitting flexible use in varying feedwater chemistries. Standard 8″ × 40″ Element Size 📏 Fits most industrial RO housings. Its large active area and spiral-wound configuration ensure efficient rejection and high flux.

RO Water Plant (100 LPH to 20,000 LPH) – Advanced Reverse Osmosis Water Purification Systems Our RO Water Plants are engineered to deliver high-quality purified water for a wide range of applications — from small-scale domestic needs to large industrial requirements. With capacities starting from 100 liters per hour (LPH) up to 20,000 LPH, these systems provide reliable, efficient, and cost-effective water purification solutions tailored to your volume needs. Key Features: Wide Capacity Range: Choose from compact 100 LPH units ideal for small offices or communities, to heavy-duty 20,000 LPH plants designed for industries and commercial complexes. Advanced Filtration Technology: Utilizes multi-stage filtration including pre-filters, precision RO membranes, and post-treatment options ensuring removal of dissolved salts, harmful chemicals, bacteria, viruses, and suspended solids. Energy Efficient & Cost-Effective: Designed with energy-saving pumps and optimized membrane performance for lower operational costs. Durable & Corrosion-Resistant Construction: Built with high-quality stainless steel and robust components to ensure long service life and minimal maintenance. User-Friendly Control Panel: Equipped with automated control systems including flow meters, pressure gauges, and alarms for seamless operation and monitoring. Customizable Configurations: Available with additional features such as UV sterilization, chemical dosing, and storage tanks tailored to specific water quality and usage needs. Applications: Drinking water supply for residential complexes, offices, schools, and hospitals. Process water for industries including pharmaceuticals, food & beverage, and electronics. Commercial uses such as hotels, restaurants, and water bottling plants. Agricultural and irrigation needs where purified water is required. Why Choose Our RO Water Plants? High Purity Water: Ensures safe, clean, and great-tasting water. Scalable Solutions: Perfectly sized units for any volume requirement. After-Sales Support: Expert installation and maintenance services. Compliance: Meets national and international standards for water purification.

Specifications :- Model ORG Softener Mini Pro ORG Softener Nano Pro Max. Flow Rate 600 LPH 500 LPH OBSA (Basis on 200 ppm) 6000 Ltr 6250 Ltr OBR (Basis on 200 ppm) 1500 Ltr 625 Ltr Resin Tank Volume 8 Ltr 8 Ltr Resin Quantity 6 Ltr 2.5 Ltr Salt Tank Volume 8 Ltr 8 Ltr Salt Required / Regeneration 0.9 kg 0.375 Kg Salt Qty.(OBSA) / No's of Regeneration 3.6 kg / 4 3.7 kg / 10 Working Pressure 0.15 - 0.6 MPA 0.15 - 0.6 MPA Inlet-Outlet Size 1/2' 1/2' Dimensions in mm L230 X W250 X H1050 L230 X W250 X H760 Unique Features : Can be easily Install on wall and ready to use. Inbuilt brine tank with salt perforated bottom plate. No need to fill water manually in salt tank. Electricity not required. Incorporated multiport valve make easy backwash and regeneration. Can be use for bathroom, washing machine and dish washer. Upgraded Design: The new model features a sleek, modern design for enhanced aesthetics. Stronger Hanging Clamp: Improved clamp design ensures stable wall mounting with no tilting, providing a secure fit.